MotoCAN® – Motorcycle Accessories Manager

2024-09-16T16:14:20+02:00

Type: Accessories
Price: 250.00

The MotoCAN® is designed to be directly connected to your motorcycle, interfacing with its CAN-bus system. This offers an incredibly adaptable and effortless plug-and-play solution for incorporating additional components to your bike including Motorcycle Lights.

This eliminates the necessity of wire cutting, which could potentially invalidate your warranty. With the MotoCAN, you gain the ability to securely oversee your accessories, personalize your motorcycle, and enhance its safety for a smoother riding experience.

Lone Rider MotoCAN can power and control Motorcycle Lights and other motorcycle accessories. Upgrade to control lights and other accessories automatically and directly from the bikes button clusters

MotoCAN is a Plug-in-Play solution to seamlessly control:

Motorcycle Lights

LIN Smart Lights

Auxiliary Lights

Brake Lights

Air Horns

GPS Navigation

Dash Cams

Heated Gear

Air Compressor

USB Chargers

And other accessories

MotoCAN stands out from other CANBUS devices as has been programmed to get the full range of Motorcycle Lights features and functions. These extended features and functions are compatible with MotoCAN and Motorcycle Lights.

KEY FEATURES

One device controls all functions

Unified system management

Adds enhanced safety features

Maintains manufacturer warranty

Connects directly to the CAN-Bus

Discreet design – fits seamlessly under the seat

Simple software setup via USB

Four independently fused electronic channels

Waterproof and dust-resistant

Motorcycle Lights Compatible

LIN compatible

4x 10A outputs (25A, max 20s)

Self-resettable electronic fuses

3-wire brightness control

DOWNLOAD SOFTWARE

https://www.lonerider-motorcycle.com/motocan-software

COMPATIBILITY LIST

https://www.lonerider-motorcycle.com/pages/motocan-compatibility

WHATS IN THE BOX?

1x Bike specific MotoCAN

3x MT 3-Pin Blanking Plugs (to attach other accessories)

1x Micro USB Dust Cover

3x MT 3-Pin Male Connector Stub Set

3x MT 3-Pin Rubber Plugs

20x Zip Ties

1x USB-USB micro Cable

The MotoCAN is required to use and customize all Moto Light features. It is recommended that the Motorcycle Lights be exclusively used with MotoCAN. To know what MotoCAN you need for your specific bike, use the VIN decoder.

Please note: If you can't find your bike model under "Variant" above, you can order the Hex Innovate Gen II ezCAN to be used with your Motorcycle Lights until we have a MotoCAN available for your bike. In this case, order the variant "Motorcycle Lights set (2 pods) | No MotoCAN".

Compatible CANbus system:

Lone Rider MotoCAN

HEX ezCAN Gen2 (post V2408 software version)

NOT compatible with :

Any other CANbus system

DENALI CANsmart

DENALI DialDim

Clearwater CANopener

TECHNICAL FEATURES

MotoCAN Hardware specifications |
Voltage supply | 6V to 18V
System fuse rating | 30A, automotive mini blade fuse
Maximum continuous current | 30A (25A recommended)
Current consumption (operating) | 25mA (typical)

Current consumption (sleep)

750µA (typical)
1mA (max)

Number of output circuits

Four, each with switched 12V power, Ground and
PWM/data brightness control wire

Output circuit current

10A per circuit (continuous)
25A (max) for 25 seconds

Output circuit fusing | Electronic fuses, configurable from 1A to 25A
Output circuit 3rd wire (PWM/data control) | 40mA (short circuit current)

Measurement ranges:
Output current
CAN-bus voltage
Horn input
Switch input

0 to 72A
0 to 22V
0 to 22V
0 to 3.3V

Internal thermal protection | 90ºC maximum internal temperature
Transient protection | As per UN ECE Regulation 10 (Revision 5)
CAN connectivity | 1x CAN 2.0B
USB connectivity | USB V2.0 full speed, micro B-type connector
LIN connectivity | Configurable LIN master (White power circuit)

Water and dust protection

Sealed unit. Waterproof USB connector with dust cover
and sealed connectors

PRODUCT CERTIFICATION